Flattened Expanded Metal Mesh Cost Effective Way For Many Applications
Flattened Expanded Metal Mesh Introduction:
Flattened expanded metal is made by passing standard expanded metal through a cold rolled reducing mill, leaving a flat and smooth surface that is similar to perforated metal. The rolling process makes the strands and bonds down, thus reducing the thickness of the metal sheet and stretching the pattern. Flattened expanded metal possesses many properties, making it a very versatile product suitable for applications across many industries, such as commercial, automobile and agricultural.
Specifications:
Material: carbon steel, aluminum, stainless steel, copper, or other alloys.
Surface treatment: galvanized, powder coated, PVC coated, etc.
| Flattened Expanded Metal |
| Mesh Aperture | Mesh Aperture | Strand Width | Strand Thickness | Sheet Size LWD x SWD | Material Type |
| LW (mm) | SW (mm) |
| 3.81 | 2.03 | 0.79 | 0.6 | 1250 x 1250 | Mild Steel |
| 6.85 | 3.56 | 1.3 | 0.9 | 1250 x 2500 | Mild Steel |
| 9.5 | 5 | 1.3 | 0.9 | 1250 x 2500 | Mild Steel |
| 14.22 | 4.8 | 1.85 | 0.9 | 1250 x 2500 | Mild Steel |
| 23.11 | 5.84 | 3.2 | 1.52 | 2440 x 1220 | Mild Steel |
| 24.38 | 7.11 | 2.39 | 1.14 | 2440 x 1220 | Mild Steel |
| 24.38 | 7.87 | 2.06 | 1.47 | 2440 x 1220 | Mild Steel |
| 24.38 | 7.62 | 2.08 | 1.14 | 1250 x 2500 | Mild Steel |
| 32.77 | 10.92 | 3.18 | 1.5 | 2440 x 1220 | Mild Steel |
| 33.53 | 12.45 | 2.31 | 1.14 | 1250 x 2550 | Mild Steel |
| 33.53 | 12.45 | 2.31 | 1.14 | 2440 x 1220 | Mild Steel |
| 42.93 | 14.22 | 4.6 | 2.69 | 2440 x 1220 | Mild Steel & H D Galv |
| 42.93 | 14.22 | 4.6 | 2.69 | 1250 x 2500 | Mild Steel & H D Galv |
| 39.12 | 18.29 | 4.72 | 2.74 | 1220 x 2500 | Mild Steel |
| 43.43 | 18.03 | 2.31 | 1.14 | 1250 x 2500 | Mild Steel & Pre-Galv |
| 43.18 | 17.27 | 3.23 | 1.45 | 2440 x 1220 | Mild Steel |
| 42.93 | 17 | 6 | 3.7 | 1220 x 2440 | Mild Steel |
| 77.47 | 27.18 | 6.53 | 2.9 | 2440 x 1220 | Mild Steel |
| 3.5 | 2.05 | 0.79 | 0.56 | 1250 x 1250 | Pre-Galv |
| 5 | 3.45 | 1.3 | 0.7 | 1250 x 2500 | Pre-Galv |
| 6 | 4 | 0.8 | 0.6 | 1250 x 1250 | Pre-Galv |
| 35.05 | 12.45 | 2.31 | 1.14 | 1250 x 2500 | Pre-Galv |
| 6.86 | 3.56 | 1.27 | 0.9 | 1250 x 2500 | Aluminum |
| 13.97 | 4.83 | 1.8 | 0.9 | 1250 x 2500 | Aluminum |
| 24.1 | 7.11 | 2.39 | 1.14 | 1250 x 2440 | Aluminum |
| 35.05 | 11.94 | 2.34 | 1.14 | 1250 x 2440 | Aluminum |
| 40.64 | 17.78 | 4 | 2.9 | 1250 x 2500 | Aluminum |
| 43.18 | 17.78 | 2.34 | 1.12 | 1250 x 2000 | Aluminum |
| 3.5 | 2.05 | 0.75 | 0.5 | 1250 x 1625 | Stainless 430 |
| 11.7 | 8.5 | 1.5 | 1.5 | 1000 x 2000 | Stainless 304 |
| 14.22 | 4.3 | 1.83 | 0.9 | 1000 x 2000 | Stainless 304 |
| 14.22 | 4.3 | 1.83 | 0.9 | 1250 x 1830 | Stainless 316 |
| 21 | 6 | 2.1 | 1.2 | 1250 x 2500 | Stainless 304 |
| 21 | 9 | 3 | 1.5 | 1250 x 2500 | Stainless 304 |
Shearing methods
Expanded metal shearing methods include four ways from two directions. They give you an instruction when ordering expanded metal.
End bond shearing: One end is cut on the bond parallel to the SWD, the other end usually has open diamonds.
End random shearing: The shearing direction is parallel to the SWD. The end random cut normally leaves open diamonds at the ends.
Side bond shearing: Side bond cut is made along the length of the metal sheet on the center line of the bond over the specific width.
Side random shearing: Side random shearing is cut that is parallel to the LWD dimension of the metal sheet, leaving opening diamonds.
Surface Treatment: hot-dipped, electrol galvanized, pvc-coated.
Flattened Expanded Metal is formed by flattening process based on standard expanded metal. Its strand width and bond are in the same horizontal plane with plate surface. Compared with standard expanded metal,the plate thickness will be thinner and opening will be larger.
Features:
Steel construction provides strength, welded ability and wear resistance.
Stainless steel for corrosion resistance.
Various materials and a great variety of sizes, styles for choice.
Cost effective way for many applications.
The outer layer can be coated any color for pleasing appearance.
Applications of flattened expanded metal sheet:
Shelves in shopping malls and supermarkets.
Furniture in parks and other city corners.
Wastebaskets, desk organizers, desk stays and other office supplies.
Decorative mesh in interior of buildings and hotels.
Support mesh in the expanded metal filter element.
Bicycle basket on all kinds of bicycles.
Elevator gate on the construction site.
Packing:
Expanded metal should be packed firmly and securely.When packing, expanded metal appears in roll type and flat type
Our expanded metal mesh product list:
Raised Expanded Metal Sheet
Flattened Expanded Metal Sheet
Micro Expanded Metal
Mild Steel Expanded Metal Sheet
Steel Expanded Metal Sheet
Aluminum Expanded Metal Sheet
Stainless Steel Expanded Metal Sheet
Copper Expanded Metal Sheet
Expanded Metal Security Fence
Expanded Metal Isolation Fence
Decorative Expanded Metal Mesh
Expanded Metal Grating
Expanded Metal Grilles
Expanded Metal Filter Element
Expanded Metal Barbecue Grill
Expanded Metal Ceiling
Expanded Metal Chimney Cap
Expanded Metal Brick Mesh
Expanded Metal Corner Bead
Expanded Metal Corn Cage
Expanded Metal Office Supplies
Expanded Metal Facade
Expanded Metal Infill Panels
Trash Can
Cab & Truck Dividers
Machine Guarding
DVA Mesh
Expanded Metal Gate
Expanded Metal Furniture
Expanded Metal Bridge
Plaster Mesh
Interior Decoration
Dehydrator & Drying Rack
Landscape & Utility Trailers
Product Tags:
|
|
Diamond Flattened Expanded Metal Wire Mesh Small Hole 8mm Thick Images
|
